HR-WP- XD/XS 835、XD735、XD935、XD/XS435、XTD/XTS835 series
Input signal: thermocouple: K、E、S、B、J、T; cold temperature automatic compensation: 0～50℃, compensation accuracy: ±1℃
Thermoresistance: Pt100、Pt100.1、Cu50, lead resistance compensation≤15Ω
Remote resistance: 30～350Ω（remote pressure meter）
DC voltage: 0～5V、1～5V；
DC current: 0～10mA、4～20mA
Input resistance: current signal Ri≥250Ω,voltage signal Ri≥250KΩ。
Output signal: analog output: DC 0～10mA output（load resistance≤750Ω）
DC 4～20mA output（load resistance≤500Ω）
DC 0～5V output（load resistance≥250KΩ）
DC 1～5V output（load resistance≥250KΩ）
Switch output: relay control output—relay ON/OFF with hysteresis, optical isolation, 400V/0.5A
Solid relay control output─SSR output, optical isolation, 6～24V/30mA
Double-way SCR no contact switch output─SOT output, optical isolation, 400V/7A
Communication output: interface type: -- standard series double-way communication interface: optical isolation, RS-485，RS-232C, etc
Baud rate─1200～9600bps internal free setting
Communication principle─ use standard MODBUS RTU communication principle
Feed output: DC24±1V, load current ≤30mA
Characteristics: measuring accuracy: ±0.5%FS±1 bytes or 0.2%FS±1 bytes
Resolution: ±1 bytes
Measuring range: -1999～9999 bytes
Display mode: -1999～9999 measuring value
-1999～9999 setting value
-1999～9999 controlling value
0～100% output volume
Double LED output volume
Temperature compensation: 0～50℃ digital temperature automatic compensation
Parameter setting: panel button setting
Parameter password locked
Protection mode: ·input circuit break alarm, relay output state LED indicate
Input over/under range alarm
Automatic reset if under voltage
Automatic reset with abnormal conditions
Using environment: temperature: 0～50℃
Relative humidity: ≤85%RH ·prevent corrosive gas
Supply voltage: general: AC220V %
Special: AC90V～265V- switch power: DC24V±2V- switch power
Power consumption: ≤5W（AC220V linear power supply）
≤4W（AC90～265V switch power supply）
≤4W（DC24V switch power supply）
,
