Input signal: thermocouple: standard thermocouple── B、S、K、.E、J、T、WRe, etc
Thermoresistance: standard thermoresistance──Pt10、Pt100、Cu50、Cu100; remote pressure resistance 30~350Ω
current: 0~10mA、4~20mA、0~20mA(input resistance≤250Ω)
Voltage: 0~5V、1~5V, etc(input resistance≥250kΩ); all kinds mV signal(input resistance≥10 MΩ)
Measuring range: -1999 ~ 9999 bytes
Measuring accuracy: ±0.2%FS ±1 bytes or ±0.5 %FS ±1 bytes. display accuracy of bargraph 1%
Resolution: ±1 bytes
Display mode: -1999 ~ 9999 measuring value
-1999 ~ 9999 setting value
0~100% measuring value bargraph show
LED display
Output signal: analog output: DC 0~10mA(load resistance≤750Ω)
DC 4~20mA(load resistance≤500Ω)
DC 0~5V (output resistance≤250Ω)
DC 1~5V (output resistance≤250Ω)
switch output: relay control output── relay ON/OFF with hysteresis
Contact volume: AC220V/5A;DC24V/7A(resistive load)
SCR control output── SCR output, trigger SCR : 400V/100A
Solid relay output── SSR output, 6~24V/30mA(voltage nonadjustable)
communication output: interface mode── standard series double-way communication interface: RS -485 , RS-232C , RS-422, etc
Baud rate──300~9600bps internal free setting
Feed output: DC 24 V, load current ≤30 mA
control, alarm mode: can choose 1~4 limit control, LED indicate. Control mode: relay ON/OFF with hysteresis
Control, alarm accuracy: ±1 bytes
Temperature compensation: 0~50℃ digital temperature automatic compensation
parameter setting: panel button setting
Parameter password locked
Protection type: input circuit break alarm, relay output state LED indicate
Input over/under range alarm
Automatic reset if under voltage
Automatic reset with abnormal conditions(Watch Dog)
using environment: temperature: 0~50℃
relative humidity: ≤85RH prevent corrosive gas
Supply voltage: general ·AC 220 V + 10 -15% ( 50 Hz ±2 Hz ) linear power supply
special: ·AC 90~260 V─ switch power supply ·DC 24 V±2 V─ switch power supply
power consumption: ≤5W(AC220V linear power supply)
≤4W(AC90~265V switch power supply) ·≤4W(DC24V switch power supply)
structure: standard snap-on
Weight: 420 g ( AC 220 V linear power supply) · 260 g ( switch power supply),
,