Input signal: thermocouple: standard thermocouple── B、S、K、.E、J、T、WRe, etc
Thermoresistance: standard thermoresistance──Pt10、Pt100、Cu50、Cu100; remote pressure resistance 30～350Ω
current: 0～10mA、4～20mA、0～20mA（input resistance≤250Ω）
Voltage: 0～5V、1～5V, etc(input resistance≥250kΩ); all kinds mV signal(input resistance≥10 MΩ)
Measuring range: -1999 ～ 9999 bytes
Measuring accuracy: ±0.2％FS ±1 bytes or ±0.5 ％FS ±1 bytes. display accuracy of bargraph 1%
Resolution: ±1 bytes
Display mode: -1999 ～ 9999 measuring value
-1999 ～ 9999 setting value
0～100% measuring value bargraph show
LED display
Output signal: analog output: DC 0～10mA(load resistance≤750Ω)
DC 4～20mA(load resistance≤500Ω)
DC 0～5V (output resistance≤250Ω)
DC 1～5V (output resistance≤250Ω)
switch output: relay control output── relay ON/OFF with hysteresis
Contact volume: AC220V/5A；DC24V/7A（resistive load）
SCR control output── SCR output, trigger SCR : 400V/100A
Solid relay output── SSR output, 6～24V/30mA(voltage nonadjustable)
communication output: interface mode── standard series double-way communication interface: RS -485 , RS-232C , RS-422, etc
Baud rate──300～9600bps internal free setting
Feed output: DC 24 V, load current ≤30 mA
control, alarm mode: can choose 1～4 limit control, LED indicate. Control mode: relay ON/OFF with hysteresis
Control, alarm accuracy: ±1 bytes
Temperature compensation: 0～50℃ digital temperature automatic compensation
parameter setting: panel button setting
Parameter password locked
Protection type: input circuit break alarm, relay output state LED indicate
Input over/under range alarm
Automatic reset if under voltage
Automatic reset with abnormal conditions（Watch Dog）
using environment: temperature: 0～50℃
relative humidity: ≤85RH prevent corrosive gas
Supply voltage: general ·AC 220 V + 10 -15% ( 50 Hz ±2 Hz ) linear power supply
special: ·AC 90～260 V─ switch power supply ·DC 24 V±2 V─ switch power supply
power consumption: ≤5W（AC220V linear power supply）
≤4W（AC90～265V switch power supply） ·≤4W（DC24V switch power supply）
structure: standard snap-on
Weight: 420 g ( AC 220 V linear power supply) · 260 g ( switch power supply),
,
