Photoelectric pulse sensor, can provide 24V/50mA sensor power, active measuring signal 0-5KHZ
Standard TTL or CMOS level pulse signal, active measuring signal 0-5KHZ
Speed series: K settable
Can be with speed upper, lower limit alarm control output
Can be with speed 0-10mA、4-20mA、0-5V、1-5V isolated transmission output
Can be with RS485/ RS232/ Modem isolated communication interface
FBBUS-ASCII and MODBUS-RTU protocol, optional. (MODBUS-RTU protocol just for Modbus
Using conditions: environment temperature: 0 ～ 50℃; relative humidity: £90%
Power voltage: AC90V ～ 265V （50 ～ 60HZ）or DC24±10%V
Input signal : CMOS、TTL level pulse signal, sine wave signal or optical signal
Input characteristics: 0～10KHZ input resistance>1kW
Display resolution: 0.001,0.01,0.1,1
Basic error: 0.5%F.S±1 bytes
Output characteristics: relay volume: 3A/220VAC or 3A/24VDC
Internal cold compensation temperature: 0 ～ 50℃
Power output of transmitter: voltage 24±10%VDC, max current 100mA, can directly connected two-wiring passive transmitter
Power consumption: < 5W
Weight: < 0.5kg, , ,
,
