With RS232 or RS485 communication, use standard MODBUS RTU protocol and PC, form data collecting system and control system
Brand model
HR-WP- XC/XS801、803、804、401、403、404、XC101、103、701、703、704、901、903、904 series
XTC/XTS801、803、804 series
Characteristics: display mode: single row four LED display value
Display range: 1999～9999
Measuring accuracy: ±0.2%FS±1 bytes or 0.5%FS±1 bytes；±0.1%FS±1 bytes（ need special order）
Resolution: ±1 byte
Protection type: input circuit break, input signal over/ under range alarm;
Input signal: thermocouple ： K、E、S、B、J、T、R、WRe3-25; cold temperature of automatic compensation: 0～50℃; compensation accuracy: 1℃
Thermal resistance: Pt100、Cu100、Cu50、BA2、BA1; compensation range of lead resistance
Linear resistance: 0～400Ω
Remote resistance: 30～350Ω(remote pressure meter)
DC voltage: 0～20mV、0～100mV、0～5V、1～5V、0～5V evolution、1～5V evolution、-5V～5V；
-10V～10V、0～10V
DC current: 0～10mA、0～20mA、4～20mA、0～10mA开方、4～20mA evolution
Input resistance: current signal: Ri≥500KΩ；voltage signal Ri≤100Ω
Output signal: output accuracy: ±0.2%FS±1 bytes or 0.5%FS±1 bytes；±0.1%FS±1 bytes（ need special order）
Current signal: DC 4～20mA, resistive load, R≤500Ω, DC 0～10mA, load resistance DC 0～10mA
Voltage signal: DC 0～5V；DC 1～5V，load resistance R≥250KΩ ,
Alarm output: relay control output: ---relay ON/OFF with hysteresis
Communication output: baud rate---2400、4800、9600bps internal free setting, use MODBUS RTU communication protocol
Distribution output: DC24±1V; load current: ≤30mA
Using environment : environment : -10～55℃; environment humidity: 10～90%RH
Pressure strength: input/output/power/communication ≥1000V.AC 1minute
Isolated resistance: input/output/power/communication≥100MΩ
AC power: 90～265V（switch power）, frequency: 50Hz/60Hz
DC power: 24V±2V（switch power）
Power consumption: <5W
